ENEnglish
AZAzərbaycanca
UZO‘zbekcha
ARالعربية
FRFrançais
DEDeutsch
RUРусский
The Paste Mouth
The fast-closing hot jaw combines the risk of crushing, cutting and burning for the hand.
CE · Vertical packaging machine
CE conformity for Vertical packaging machine
For Vertical packaging machine, the applicable CE scope is determined from intended use, energy sources, safety architecture and target market. The risk assessment, technical file, testing and conformity route must be verified against the actual model.
Package typeVertical form-fill-closing (VFFS), bar packet or small mail format
Feeding the productWeighing, screwing, volumetric vessel, pump or external system
Critical movementFilming, flat-out jaw, cutter and packing
The process limitFilm, package size, speed, jaw temperature and product characteristics
Direct response to the scope
CE conformity for Vertical packaging machine — Define the product boundary first
The machine definition specifies the film width and material, packet length, production speed, jaw type, cutter, date coding, gas washing and dosage interval. The filling system used for powder, granule or liquid product changes the load and cleaning method on the upper body. Multi-guaranteed balance, filler dosage or volumetric plate may come from a separate manufacturer; falling pipe and common command are at the ultimate system risk.
Vertical film filming belts and ladders form finger-catching points. The forward-reverse horizontal jaw carries the same area of crushing, cutting and hot surface hazard. The rotor or pneumatic cutter can be reached while film grip is being driven. If protective open-hand movement is required for change of package length, the reduced speed, pressure-holding motion and the authorized mode are designed together. The product flow from the dosing unit can start unexpectedly when the jaw is open; a common permit and restart logic must be established.
The first legal event is from 20 hob 2027 (EU) 2023/1230; for Turkey, 2006/42/AT and national compliance are also verified. Servo drivers, weighing and heater control are covered by EMC. There is no separate LVD conformity declaration for the full machine; it contributes to the electrical proof EN 60204-1.
Product profile
Technical features that change the evaluation
The following data shows why even models with the same product name can change the path of conformity.
Package typeVertical form-fill-closing (VFFS), bar packet or small mail format
Feeding the productWeighing, screwing, volumetric vessel, pump or external system
Critical movementFilming, flat-out jaw, cutter and packing
The process limitFilm, package size, speed, jaw temperature and product characteristics
Risk architecture
The main dangers to be addressed in the file
The protective, control and verification approach shall be based on the actual product cycle.
The filming system
The ribbon and stairs can pull the finger in while filming, which requires a safe setting mode.
Cutting knife
Access to the knife during film or package jamming must not be possible without interruption of movement.
Interface of the dosing unit
The movement of the external unit and the product flow are connected to the common security logic of the main machine doors.
Dust and gas washing
Thin product dust or gas used requires leakage resistance, ventilation and conditional scope analysis.
The conditional law matrix
When will the regulation take effect?
A single product name doesn't give the same answer for all models.
| The subject | The situation | Product-based evaluation |
|---|---|---|
| The Commission shall adopt implementing acts in accordance with Article 21 of Regulation (EC) No 2006/42/EC and Turkey's 2006/42/AT. | YES, YES | The Directive period begins with the first supply or first service in the EU/AEA for vertical packaging machines. |
| (EU) 2023/1230 | IT 'S A MESS . | For the EU/EEA, the Regulation period begins when the vertical packaging machine is first offered or first put into service. |
| The following information is provided for in Article 2 (1) of Regulation (EU) No 575/2014: | IT 'S A MESS . | Servo, weighing electronics and heater switching are evaluated. |
| 2014/35/EU LVD | NO , NOT AT ALL . | Electrical hazards are assessed in accordance with Appendix I 1.5.1 to 2006/42/AT in the vertical packaging machine file; the dosage unit or electrical accessory supplied separately is examined in its supply status. |
| 2014/68/EU PED | IT 'S A MESS . | The gas washing and pressure equipment are analyzed using technical data. |
| The following information is provided: | IT 'S A MESS . | If there is a burning product dust or explosive design, it is analyzed. |
Standard and verification approach
- EN 415-3: The product type provides for the risks of jaw, feed and access in form-fill-closing machines.
- EN 415-10: It supports common security headers on packaging machines with a dedicated section.
- EN ISO 12100: It ties the boundaries of film, product, format and task to the process of reducing risk.
- EN 60204-1: It can be used in electrical equipment, heater and control verification experiments.
- EN ISO 13849-1/-2: It helps verify the door, jaw position and dose permissions functions.
Important distinction
CE conformity for Vertical packaging machine — Product conformity is a separate study.
ISO management system certification does not replace product-specific risk analysis, test evidence and compliance file.
The compliance work plan
In what order will the technical preparation proceed?
Limiting the package recipe
Film, product, dosage, speed, temperature and options are all tied to the model family.
Review the filming task
Safe modes are designed for rolling change, filming, jaw adjustment and compression.
Don 't test the jaw-clipping function
The opening, position, heating limit, stepwise movement and energy return behaviours are confirmed.
Do not close the dose integration
The movement of the external unit, product flow, emergency stand-up and restart approval are tested with the main machine.
Publishing the file and report
Format-clean boundaries are transferred to the instruction; the label and the declaration of conformity indicate the system delivered.
Product records to search for in the technical file
- The vertical packing model-format matrix
- Film trail, jaw and cutting drawings
- Product and task-based risk assessment
- Electrical, pneumatic and heating schemes
- Gate-screen-dose security verification
- Temperature, posture and electrical tests
- Filmmaking, cleaning and maintenance instructions
- The EU Declaration of Conformity is prepared for the vertical packaging machine during the period of the Directive. The EU Declaration of Conformity is prepared for the vertical packaging machine during the period of regulation.
They 're the entries for a healthy offer .
- VFFS, type of bar pack or small bag machine
- Film width, material and package size
- Maximum production speed
- The jaw-closer and heater information
- Brand and interface of the dosing unit
- Data on product dust and gas washing
- Existing testing, number of models and market
The single-line VFFS and multi-line bar packaging machine do not require the same verification effort.
Internal links
Relevant category and product guides
Compare the top coverage or other similar risk architecture.
Frequently Asked Questions
CE conformity for Vertical packaging machine — Technical answers about
Who gives the CE certificate to the VFFS machine?
The manufacturer assesses conformity, establishes the technical file and signs the statement. A general third-party CE certificate is not required for every machine.
Is the dosing unit sufficient if it's separately reported?
No, the falling tube, movement, product flow, joint posture and restart behavior are also evaluated in the final system.
Can you make an open-door move in film-switching?
If the risk assessment allows, limited motion can be designed with reduced speed, pressure, control and authorized mode.
Does the gas wash fall under PED?
The limit of the pipe or installation is determined by the pressure, volume and machine arrangement; there is no automatic result.
Does the stainless steel body complete the CE for food?
No, hygienic material is useful, but the safety of the jaw, cutter, control, electrical and cleaning equipment must also be proven.
What should the jaw line do when the dosing unit stops?
The product flow and jaw phase are securely attached; dose failure should not cause compression or hot jaw to remain accessible, re-starting should be conscious.
Technical scope and offer
CE conformity for Vertical packaging machine — Let us clarify your technical file together.
Share the model of the machine or device, the location of use and the basic technical data. The Kayra Patent explains the path to be followed for scope analysis, technical preparation, test plan and, where necessary, approved organization coordination.
Final inspection of content and technical scope: 20 August 2026The official bases: European Commission Machinery · EUR-Lex — EU 2023/1230