ENEnglish
AZAzərbaycanca
UZO‘zbekcha
ARالعربية
FRFrançais
DEDeutsch
RUРусский
The bouncing parts and equipment
The glass jaw, workpiece or broken piece can be held in high energy; proof of durability over maximum period and binding scenario is required.
CE · CNC and machining equipment
CE conformity for CNC and machining equipment
For CNC and machining equipment, the applicable CE scope is determined from intended use, energy sources, safety architecture and target market. The risk assessment, technical file, testing and conformity route must be verified against the actual model.
Family of productsCNC screws, machining centers, CNC milling machines and stationary stoneworking desks
Main boundaryThe manufacturer's joint supply of auxiliary equipment with the machine body, control, equipment and workpiece connection system
Primary evidenceModel-based risk assessment, protective verification and security function records
Transition dateThe first market offer or service in the EU/AEA shall be applicable in accordance with 2006/42/EC, including 19 hob 2027; as from 20 hob 2027 (EU) 2023/1230; the scope of Turkey shall also be confirmed
Direct response to the scope
CE conformity for CNC and machining equipment — Define the product boundary first
The safety of the welded manufacturing cell depends more on the actual operating system than the machine's catalogue name. The same body may have an automatic gear changer, rod driver, rod conveyor, robot loading, high-pressure cooling or probing system. Each of these options changes access points, safe posture mode, and control system boundaries. Therefore, a category assessment can eliminate the real risks of the target market, series and model family, material to be processed, maximum period, axis strokes, separate connection arrangement, and environmental equipment connected to the machine.
The technical backbone of the fitness plan is the risk assessment. The rolling mirror or the launching effect of the gear, the compression zones of the fast axes, the broken cutting edges, the hot wire, metal processing fluid, noise and the energy stored during maintenance are treated in separate scenarios. Not only the presence of the retainer is verified; impact resistance, connection, field of view, locking logic and allowed movements are verified when open. The selected operating mode, low speed, pressurized operation and authorization should be stopped when the movement protector is open to set, measure and correct errors. The emergency design does not replace normal stopping; the safety function must measure how safe the movement can be brought along with the design of how dangerous the movement can be.
In terms of electrical equipment, EN 60204-1 is a strong technical reference in most industrial CNC desks, but automatic coverage is not declared until the characteristics of the machine are seen. Feeding voltage, short circuit resistance, protective conductivity, insulation, no longer voltage, panel temperature and electromagnetic environmental design inputs. The safety function architecture is also studied due to servo drivers, frequency converters, secure torque shutdown inputs and network-connected control elements. The EMC Directive is a product layer that can be applied independently; the electrical safety objectives of LVD are addressed under the law and the LVD is also used for a normal machine unless the appropriate LVD declaration is required.
The EU/AEA period in CNC and Wireframed Manufacturing Machines is selected by first-market offering or first-service offering. The first event of the CNC family includes the hob 19, 2027 2006/42/EC; the first event of the same product family is implemented from hob 20, 2027 (EU) 2023/1230. National compliance with 2006/42/AT for CNC and Wireframed Manufacturing Machines in Turkey is also confirmed.
Product boundaries
How do you sort out the right product line in this category?
Name similarity alone is not sufficient; the energy source, intended use, and safety architecture are read together.
| Product or limit | The distinguishing feature | The relevance of the results |
|---|---|---|
| Standing alone | The CNC machine, which is supplied by the manufacturer ready to work, is evaluated as a complete machine beyond its limits and its intended equipment. | |
| Robot loading cell | If the robot, the fence, the door and the desk controller work together safely, the integrator will handle the entire cell's risks and interface. | |
| Partially completed machine | For a subunit that cannot perform a specific application on its own, the installation instructions and the organization statement may be up for grabs. | |
| Second hand or refurbished counter | A new CE process is not required unless the market supply history, the scope of change and the performance improvement are examined to determine whether it affects safety. | |
| Multi-model family | The use of a common body may make a single file possible; the differences in period, power, stroke, protector and software must be indicated by the variable matrix. | |
| Import from outside the EU | The importer shall verify that, in addition to the appearance of the sign and the declaration, the manufacturer has established a mechanism to submit the technical file to the competent authorities. |
Risk architecture
The main dangers to be addressed in the file
The protective, control and verification approach shall be based on the actual product cycle.
Axis and automatic door movement
The board, tray, pallet changer and motor door can create crushing or compaction in accessible volumes; the sensing and standing distance is verified together.
Energy left in the care
Hydraulic accumulator, pneumatic circuit, gravity-driven axis and DC bar voltage can also pose a threat after locking.
Fog, liquid and hot ash
Metal processing liquid is controlled by the smoke, skin contact, slippery soil and buildup of combustible material; sealing, leakage resistance and cleaning instructions.
Unexpected restart
A power return, remote command, program continuation or security gate closure should not automatically trigger a dangerous movement.
Software and mode selection
The service password, manual data entry and remote connection security function are not invalidated; change records are kept under control.
The conditional law matrix
When will the regulation take effect?
A single product name doesn't give the same answer for all models.
| The subject | The situation | Product-based evaluation |
|---|---|---|
| The Commission shall adopt implementing acts in accordance with Article 21 of Regulation (EC) No 2006/42/EC and Turkey's 2006/42/AT. | YES, YES | The directive period begins with the first supply or first service in the EU/AEA for CNC and Wireframing Machines. |
| (EU) 2023/1230 Regulation on machinery | IT 'S A MESS . | In the EU/EEA, the regulatory period begins when CNC and CNC manufacturing machines are first offered or first put into service. |
| The following information is provided for in Article 2 (1) of Regulation (EU) No 575/2014: | IT 'S A MESS . | The emission and immunity characteristics of the electronic driver desk shall be assessed in conjunction with the target electromagnetic environment. |
| 2014/35/EU LVD | NO , NOT AT ALL . | Electrical hazards are assessed in accordance with Appendix I 1.5.1 to 2006/42/AT in the CNC and Wireframing Machinery file; electrical accessories other than board, driver or desk are examined in their own supply status. |
| 2014/68/EU PED | IT 'S A MESS . | The category and exceptional conditions of pressure accumulator, tank or system are examined through product data. |
| The following information is provided: | IT 'S A MESS . | A comprehensive analysis is required if the machine is designed for use in an explosive environment or if it creates an explosive atmosphere within itself. |
Standard and verification approach
- EN ISO 12100: Type A is the basic method for setting machine boundaries, identifying hazards, and documenting the order of risk mitigation.
- EN 60204-1: The electrical equipment of the machine is selected according to the product characteristics for feeding, protection, control circuit, marking and verification.
- EN ISO 13849-1/-2: Protective locks can be used to verify performance design of stopping and similar security functions.
- EN ISO 23125: It is a type C reference for the specific important hazards and protective measures of the towering desks.
- EN ISO 16090-1: It deals with product-type safety provisions in processing centers, milling and transfer machines.
- EN ISO 16089: The solid stone is the product standard for the risk of storage, rolling and working mode of the stone-cutting machines; the current pressure is checked.
- The following is the list of the countries of the European Union:: It helps in the selection and design of fixed or mobile protectors with locking patterns.
The compliance work plan
In what order will the technical preparation proceed?
Map the product family
The turret, machining center, milling and stonework models are divided into separate configurations with alternating options of rotor, axis, gear, storage and automation.
Remove the task inventory
The connection, setting, measurement, discharge, deactivation and maintenance tasks are recorded on a machine type basis prior to automatic production.
Matching the standard type C
Only EN ISO 23125, EN ISO 16090-1 or EN ISO 16089 coverage is applicable to the subfamily that corresponds to the actual design.
Protect and verify function
The storage resistance, door lock, safe speed, stand, energy conversion and environmental equipment signals are proven by measurement or calculation.
Do not publish the serial file
The electrical-EMC records, instructions, variant matrix, label and period are subject to technical verification by the same product identity as the AT or EU Statement of Conformity.
Product records to search for in the technical file
- CNC and wire mesh family matrix
- Settings showing machine boundaries and interfaces
- Risk assessments for each product family
- Electrical, hydraulic, pneumatic and lubrication schemes
- Protective and security verification records
- Standing, electrical, noise and necessary emission tests
- Installation, use, setup, equipment and maintenance instructions
- The AT Statement of Conformity of the Directive period for CNC and Wireframed Manufacturing Machines is prepared. During the regulatory period, the EU Statement of Conformity is prepared for CNC and Wireframed Manufacturing Machines.
They 're the entries for a healthy offer .
- Type of machine and number of models to be included
- Rotation, power, axis, stroke and team capacity
- Technical drawings of the lock and lock
- Robot, pallet, bar driver and conveyor options
- Circuit diagrams with current risk analysis
- Complete test and account reports
- Target market, series plan and date of supply
Category work is not a sales of package documents over product size. The offer is limited after consideration of proof of common design, variant differences, existing tests, and the validations required by each C-type standard.
Internal links
Relevant category and product guides
Compare the top coverage or other similar risk architecture.
Frequently Asked Questions
CE conformity for CNC and machining equipment — Technical answers about
Do you need an approved organization for every CNC desk?
No, the class of the machine and the chosen fit path are evaluated, not necessarily in a normal CNC desk.
Is the EN 60204-1 document sufficient for CE alone?
Electrical verification is important evidence; mechanical rotation, storage, operating mode, noise and maintenance risks should also be eliminated.
Can the old counter's CE mark be used when the robot is added?
The current convenience of the desk provides input to the interface face analysis; new access, command and position scenarios for the robotic cell are evaluated as a whole.
Can a technical file cover all the CNC models?
If the shared design is proven, the model family approach is possible, and the differences in power, duration, protective, software and options must be tracked with an open variant matrix.
How is the evidence of conservation selected at high-performance benchmark?
The maximum negative spin energy of the mirror, equipment and workpiece is determined; cabin connection, window and possible turns are verified by test or calculation according to this scenario.
What changes will the 2027 transition make to the existing files?
The requirements of the Regulation apply if the first market supply or service of a table in the EU/EEA occurs from 20 hob 2027. National compliance with 2006/42/AT is also confirmed in Turkey.
Technical scope and offer
CE conformity for CNC and machining equipment — Let us clarify your technical file together.
Share the model of the machine or device, the location of use and the basic technical data. The Kayra Patent explains the path to be followed for scope analysis, technical preparation, test plan and, where necessary, approved organization coordination.
Final inspection of content and technical scope: 20 August 2026The official bases: European Commission Machinery · EUR-Lex — EU 2023/1230